Fire and Smoke Rated Doors

Learn More About Our Fire and Smoke Rated Door Solutions

Contact Us
Fire and Smoke Rated Doors McKeon 2000

McKeon Safescape T2000 Series

This vertical coiling fire and smoke-rated door system incorporates one or two deployable ADA compliant egress swing doors. Flush mounted in an adjacent wall, the complying egress swing doors deploy and lock into position upon an alarm condition command. Once securely in place, the integral egress doors and frames serve as side guides to accommodate a three-hour roll-down door assembly the descends at a governed rate. This system is available for unlimited heights and widths up to 60’. and in a variety of finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Safescape® T2000 Series is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft rated assembly.

McKeon Safescape T5000 Series

Designed to coil at the top, this fire and smoke-rated door assembly allow the rigid bottom frame — with up to 18 fixed egress doors — to lower when deployed. Ideal for large occupant loads and wide-span openings, this system is available for unlimited heights and widths up to 60’and is available in a variety of finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The McKeon Safescape® T5000 is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft rated assembly.

Fire and Smoke Rated Doors McKeon T5006
Fire and Smoke Rated Doors McKeon-Auto-Set S4000 Series

McKeon Auto-Set S4000 Series

The side coiling design on this fire and smoke-rated door make this system ideal for openings in rated walls with limited headroom clearance and it enables the assembly to navigate around tight curves and contoured openings. The system negotiates radius curves 1’ to 6”. It is available in widths up to 80’ and heights up to 24’ and in a variety of finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Auto-Set® Model S4000 is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft-rated assembly.

McKeon Safescape S7000 Series

The side-acting Safescape S7000 Series fire door systems are available in both manual and motor-operated designs and with or without swing-type egress doors. Ideal for openings in firewalls where headroom is limited, this side-acting system can easily navigate around tight curves and contoured openings. It can negotiate radius curves 3’-0” with egress doors and 1’-6” without. The S7000 Series is available in widths up to 80’ and heights up to 24’. Choose from standard gray finish, powder coat selected from a full range of RAL colors or stainless steel.

The S7000 Series is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft-rated assembly.

Fire and Smoke Rated Doors McKeon-Safescape-9000 Series

McKeon Safescape 9000 Series

The Safescape 9000 Series side coiling fire door system is available with one or multiple integrated swing-type egress doors, a complying method of egress. The side coil design is the perfect match for applications with limited headroom clearance, tight curves, and contoured openings. The 9000 Series can negotiate radius curves 3’-0” with egress doors and 1’-6” without and is available in widths up to 80’ and heights up to 24’. Choose from either standard gray finish, powder coat selected from a full range of RAL colors, or stainless steel.

The Safescape 9000 is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft rated assembly.

McKeon Safescape AC8000 Series

This side-acting fire door system is available in either manual or motor-operated designed and with or without swinging egress doors. The AC8000 units are made up of 7-inch or 14-inch panels requiring an 8’1/2” or a 15 ½” pocket profile respectively. The system has unlimited height up to 24’ and width up to 80’. The AC8000 Series navigates around tight curves and contoured openings with ease, negotiating radius curves 3’-0” with egress doors and 2’-0” without. Choose from several finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Safescape® AC800 Series is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft-rated assembly.

Fire and Smoke Rated Doors McKeon-Safescape-AC8000-Series
Fire and Smoke Rated Doors McKeon-Auto-Set-H200 Series

McKeon Auto-Set H200 Series

The horizontal H200 Series system can eliminate the need for numerous conventional fire barriers on multiple floors. These automatic closing horizontal fire shutters prevent the migration of heat, smoke or hot/toxic gases by creating vertical compartments to separate vertical spaces from one another. The Auto-Set H200 Series is ideal for closing off atriums, stairways, escalator enclosures and skylights. The system has a width of up to 30’ and lengths up to 90’ (180’ for bi-parting). Choose from several finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Auto-Set® H200 Series is a two-hour UL10B fire-rated assembly and UL1784 smoke and draft rated assembly.

McKeon Auto-Set Model FSFD

This system is ideal for spaces that require fire and smoke protection but not an emergency egress. The custom-built Auto-Set® Model FSFD system requires little head room and side room and is available with an acoustical rating and climate control insulation. In the event of a power failure, it can self-close without electricity or battery back-up and is easy to test and automatically reset. Choose from a variety of finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Auto-Set® Model FSFD is a four-hour UL10B fire-rated assembly in masonry and drywall applications and UL1784 smoke and draft rated assembly.

Fire and Smoke Rated DoorsMcKeon-Auto-Set-Model FTFD
Fire and Smoke Rated Doors McKeon-Auto-Set-CFS-Series

McKeon Auto-Set CFS Series

The vertical acting Auto-Set® Counter Fire and Smoke Rated Model CFS shutter can accommodate almost any size opening up to 28 feet in width and 12 feet in height. Unlike conventional counter shutters, this system is easily tested and reset by on-site building personnel when needed. Choose from a number of finishes including standard gray, powder coat selected from a full range of RAL colors, or stainless steel.

The Auto-Set® CFS shutter is a three-hour UL10B fire-rated assembly and UL1784 smoke and draft rated assembly.